NOJA

ADAMS DRIVESHAFT JK FRONT & REAR 1310 CV DRIVESHAFT PACKAGE with SOLID U-joints [EXTREME DUTY SERIES]

$995.95

SKU: ASDJK-1310F-S & ASDJK-1310R-S Categories: , ,

Description

New Front and Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshafts with Solid U-joints. Custom made by Adams Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Benefits:

  • Front Driveshaft: Part# ASDJK-1310F-S
  • Made out of 2″ X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Spicer and Neapco.
  • Has Spicer U-joints the Strongest on the Market.
  • Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won’t need to Disturb the Crush Sleeve.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Rear 2 Door: Part# ASDJK-1310R-S2D    Rear 4 Door: Part# ASDJK-1310R-S4D
  • Made out of 2 1/2″ X .095 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Spicer Solid U-joints the Strongest on the Market.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts in the picture Above:

[1] 2″ X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid U-joints, and a flange on it that fits your front end so it is Easier to install. Lifetime Warranty if you twist our Tube or break a Weld.

[1] 2 1/2″ X .095 Wall Extreme Duty 1310 CV Driveshaft with Solid U-joints.

[1] American Made 1310 Front Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of 1310 U-bolts

[1] Set of Grade 10 CV Bolts. There is Eight bolts total and they have small heads on them so they are easier to install

 

Sponsored by YOURWAY PROPERTIES, Inc