NOJA

ADAMS DRIVESHAFT JK FRONT & REAR 1310 CV DRIVESHAFT PACKAGE with SOLID U-joints [EXTREME DUTY SERIES]

ADAMS DRIVESHAFT JK FRONT & REAR 1310 CV DRIVESHAFT PACKAGE with SOLID U-joints [EXTREME DUTY SERIES]

New Front and Rear Extreme Duty Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshafts with Solid U-joints. Custom made by Adams Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Benefits:

  • Front Driveshaft: Part# ASDJK-1310F-S
  • Made out of 2″ X .120 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing and will clear the exhaust and cross member eliminating damage to the driveshaft at full droop.
  • Has Long Full Spline Slip n Stub unlike some of our Competitors.
  • Built only with Components made by Spicer and Neapco.
  • Has Spicer U-joints the Strongest on the Market.
  • Has a Heavy Duty Flange on it that fits your OEM Pinion Flange so it is Easier to install and you won’t need to Disturb the Crush Sleeve.
  • Comes with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Rear 2 Door: Part# ASDJK-1310R-S2D    Rear 4 Door: Part# ASDJK-1310R-S4D
  • Made out of 2 1/2″ X .095 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
  • Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
  • Built only with Components made by Spicer and Neapco.
  • Has Spicer Solid U-joints the Strongest on the Market.
  • Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
  • Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.

This Item will include the following parts in the picture Above:

[1] 2″ X .120 Wall Extreme Duty 1310 CV Driveshaft with Solid U-joints, and a flange on it that fits your front end so it is Easier to install. Lifetime Warranty if you twist our Tube or break a Weld.

[1] 2 1/2″ X .095 Wall Extreme Duty 1310 CV Driveshaft with Solid U-joints.

[1] American Made 1310 Front Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made 1310 Rear Dana 44 Pinion Yoke.

[1] Set of 1310 U-bolts

[1] Set of Grade 10 CV Bolts. There is Eight bolts total and they have small heads on them so they are easier to install

 

Teraflex IT 4838150 HD Hinged Carrier & Adjustable Spare Tire Mounting Kit for 07-18 Jeep Wrangler JK

Teraflex IT 4838150 HD Hinged Carrier & Adjustable Spare Tire Mounting Kit for 07-18 Jeep Wrangler JK

The TeraFlex Heavy Duty Hinged Carrier & Adjustable Tire Mount is designed to carry up to a 37″ tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a single, factory style action unlike most aftermarket tire carriers. The tailgate reinforcement Kit spreads the load and weight of the tire to more than just one hinge point. Incorporating and using the factory tailgate hinge mounting points spread and separate the load as far apart as possible, resulting in maximum strength and durability. 5/8″ High-carbon Hardened Steel Pins connect the cast aluminum carrier to the HD forged hinges. Pre-installed brass bushings provide low frictions movement. The forged steel hinge brackets bolt to the factory reinforced hinge mounting points for superior strength. The hinge brackets provide support needed for the complete assembly. The HD Adjustable Tire Mounting kit allows fine tuning fore and aft spare tire position to keep it secured as close to the body as possible for maximum rear clearance. Multiple vertical mounting holes provide custom spare tire height to fit multiple rear bumper configurations and to keep center of gravity as low as possible.

JK 4″-6″ Long Adjustable FlexArm Kit w/ Brackets

JK 4″-6″ Long Adjustable FlexArm Kit w/ Brackets

The TeraFlex Elite LCG bracket kit with long FlexArms features CAD designed bracketry that has been specifically engineered to provide maximum strength. Streamlined mounting points incorporate both upper and lower mounts in one bracket for simplified installation and seamless factory styling. This kit includes all Elite LCG frame brackets, all 8 long FlexArms, and all necessary hardware. Removal of the factory control arm bracketry and welding is required. Fits all JK Wrangler models including Rubicon and Unlimited with 4″-6″ of lift.

WeatherTech Floor Liners for JKU 07-13

WeatherTech Floor Liners for JKU 07-13

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today!

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving “absolute interior protection”! The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the 2007 Jeep Wrangler Unlimited’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your 2007 Jeep Wrangler Unlimited and feature a raised lip to keep spills, dirt and grease off your vehicle’s interior, protecting your investment from normal wear and tear.

A patented High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss!

WeatherTech Floor Liners for JK 07-13

WeatherTech Floor Liners for JK 07-13

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today

A patented High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss!

The WeatherTech FloorLiner accurately and completely lines the interior carpet giving “absolute interior protection”! The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the 2007 Jeep Wrangler’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your 2007 Jeep Wrangler and feature a raised lip to keep spills, dirt and grease off your vehicle’s interior, protecting your investment from normal wear and tear.

Sponsored by YOURWAY PROPERTIES, Inc